Reading Time: 4 minutes

Cleaning kitchen splashbacks may be a difficult task, so keep reading. In this article, we’ve outlined the most effective methods for cleaning each variety of splashback. We can repair water damaged tiles, stainless steel, or acrylic splashbacks in kitchens. We offer thorough instructions for a clean kitchen in any scenario.

Cleaning acrylic splashbacks

Acrylic is a plastic that appears to be flexible but is, in fact, very delicate and soft. This implies when it comes to cleaning coloured acrylic splashbacks, you must exercise caution. Avoid using abrasive cloths since they may scratch the glossy surface. Remember that scuffs are simple to remove if they do happen. It’s also feasible to remove scuffs with a fine-toothed comb, as the maker will show you.

  1. Wipe off the splashback with a clean, gentle cloth to remove the dust and grime.
  2. Instead of using a strong chemical, use a mild household cleaner to remove oily residues.
  3. Finally, use a dry cloth to clean the splashback for a completely clean finish.

To make things easier for you, get rid of stains as soon as possible. It will be far more difficult to clean if stains are allowed to build up for a long time.

To protect against damage and chips, acrylic splashbacks require continual maintenance. Check the edges for fractures and repairs as soon as possible. If you notice any issues, correct them right away with a suitable silicone sealer. Every 5 years, you must use a specific sealer to cover the whole surface.

Cleaning glass splashbacks

To keep your glass splashbacks free of stains, use a high-quality non-abrasive glass cleaning solution. If you’d prefer not to hire someone to do it for you, feel free to make your own cleanser instead.

  1. The best ratio is one part vinegar to four parts water.
  2. With a clean spray bottle, spritz the surface all over.
  3. It’s a straightforward task that only takes a few minutes. Clean the glass using a soft microfiber cloth. Lint-free fabrics are the best choice for window cleaning.

When it comes to cleaning glass, streaking is a frequent problem. The fast-drying solution will leave streaks no matter how hard you work to create a spotless surface. To avoid this, keep the light away from the window. To avoid staining your hands, don’t use them unless absolutely necessary.

If the problem persists, use distilled water while making your DIY cleaning solution. The tap water includes minerals that cause unsightly streaks on glossy surfaces.

Cleaning stainless steel splashbacks


Cleaning stainless steel kitchen splashbacks with a simple do-it-yourself remedy is easy. You’ll need three things:

All you need is an empty spray bottle, water, lemon juice, and plain apple cider vinegar.

  1. In a spray bottle, combine the vinegar with water and spritz it onto your stainless steel splashback.
  2. Wipe the surface clean with a dry cloth to remove any greasy residues. The stainless steel’s distinctive gleam will be restored.
  3. When you’re done cleaning, use a microfiber cloth or paper towels to add a little amount of olive oil. This will restore the gleaming and polished look, making it seem new. Keep the amount to a bare minimum; otherwise, the splashback will appear greasy.

However, keep in mind that stains requiring more attention must be dealt with one at a time. If the discolouration is dry, try dabbing it with a mixture of water and baking soda. Apply the paste to the stain and leave it for half an hour before cleaning it with a dry cloth drop event watermarks after washing and drying.

If you don’t have access to a professional cleaning service, another approach to get rid of persistent marks is to utilize a 50/50 mix of water and vinegar. Apply it to the stain straight away, leave for a few minutes, then wipe with a clean cloth.

Remember the do and don’ts when cleaning splashbacks

  • To prevent stains from being absorbed, combine 3 parts water and 1 part bleach in a solution.
  • To avoid scratches, a soft, lint-free towel is advised.
  • The sealing layer may be damaged by certain chemicals. Make sure you’re using the ones specified by your supplier.
  • Check for any cracks or repairs on the splashback’s edges.

Information sourced by the author for All content is copyrighted with no reproduction rights available. Images are for illustration purposes only.